How Much Does Mobile Welding Cost? Rates, Minimums and Budgets

A plain-language Lower Mainland guide to what drives the price of on-site welding, why minimums exist, when the shop is cheaper, and how to get an accurate quote.

Quick answer: How much does mobile welding cost? It depends on the material, access, travel and time on site, so most welders quote each job individually. Most welders also add a minimum booking. At Berto's Welding, mobile work has a 4-hour minimum and job-dependent pricing, so call 236-243-8484 for a quote.

If you've ever called a welder about "one small crack" and been surprised by the price, this guide is for you. We'll explain what actually drives on-site welding costs in Vancouver and across the Lower Mainland, why minimums exist, when the shop is the cheaper choice, and how to budget before you call. Berto's Welding Ltd. has served Burnaby and the Lower Mainland since 2019. Work is led by a Red Seal A Class Pressure Pipe Welder.

New to on-site work? Start with our mobile welding in Burnaby guide or see what our mobile welding service covers.

Why mobile welding is quoted job by job

There's no single price for mobile welding, because no two jobs are the same. A short repair on clean steel in an open yard and a stainless repair overhead in a tight mechanical room take very different amounts of time. That's why Berto's prices each job after hearing about it and seeing photos. The sections below explain what moves the number, so you know what to expect when you call for a quote.

What drives the cost of mobile welding

The hourly rate is only part of it. Four things move the final number most:

Materials. Mild steel is the most straightforward. Aluminum and stainless take more set-up and skill (more on that below). Any new plate, tube, brackets or hardware is added to the job.

Access. A weld you can stand beside at waist height is quick. The same weld overhead, under a loaded trailer, up a ladder or in a tight mechanical room takes longer and needs more set-up and protection.

Travel. The truck, the engine-driven welder, the leads and the consumables all have to come to you and go home again. That time is real, even when the weld is short.

Time on site, including prep. Rust, paint, grease and old failed repairs have to be ground back to clean metal before welding. Prep and finishing often take longer than the weld itself. Hot work permits and fire watch on occupied buildings add time too.

Why Berto's has a 4-hour minimum

Mobile work at Berto's, including marine work at the dock, is booked with a 4-hour minimum. Here's why:

  • Loading the rig, driving out, parking, running leads, setting up and protecting the work area happen whether the weld takes ten minutes or three hours.
  • It gives enough time on site to finish most repairs properly instead of rushing them.
  • It lets you bundle small jobs. If you have a cracked bracket, a sagging gate and a loose railing, line them all up for the same visit and get the most out of the booking.

The "it's just one small weld" sticker shock

This is the most common surprise in the trade, and it's fair to ask about. A weld that takes 15 minutes still means:

  1. Loading the truck with the right material and consumables
  2. Driving to your site and finding parking close enough for the leads
  3. Setting up, grounding the work and protecting what's around it
  4. Grinding the joint back to clean metal
  5. Welding
  6. Dressing the weld and checking it
  7. Packing up and driving back

A ten-minute weld still needs all of that work around it. Short jobs aren't padded; the fixed work around the weld is the same no matter how small the crack. The fix is to either bring the part to the shop or bundle several jobs into one mobile visit.

Mobile vs shop welding: which costs less?

Factor Mobile welding Shop welding
How Berto's books it 4-hour minimum, job-dependent pricing Billed hourly with a 2-hour minimum
Travel and set-up Included in the visit; the rig comes to you None; you bring the part in
Best for Heavy equipment, trailers, installed gates, railings, structural steel, pipe runs, marine work Parts you can remove: brackets, small fabrication, aluminum and stainless TIG, pressure pipe
Hidden costs to weigh Access, parking, hot work permits Hauling, loading and downtime for big items
Your price Call for a quote Call for a quote

If the part unbolts and fits in a pickup, the shop is usually cheaper. If it's a 20-tonne excavator or a gate set in concrete, mobile is often cheaper overall once you count hauling and downtime.

Aluminum and specialty welding: why it costs more

Aluminum welding in Vancouver typically costs more than steel, in plain terms because:

  • Aluminum and stainless are usually TIG welded, a slower, more precise process.
  • The metal must be spotlessly clean, so prep takes longer.
  • Thin aluminum warps and burns through easily, so the welder works carefully.

At Berto's, aluminum TIG, stainless TIG and pressure pipe work in the shop is billed hourly with a 2-hour minimum. Call for a quote.

What to budget and what a visit covers

You won't get an exact number until the welder knows the job, but you can budget sensibly:

  • Plan for the minimum. For a Berto's mobile visit, that's 4 hours of booked time, plus any materials.
  • Add materials. New steel, aluminum, hinges or hardware are on top of labour.
  • Leave a buffer for surprises. Rust or a previous bad repair can turn a small fix into a bigger one.
  • Ask about tax. Check whether a quote includes GST.

A Berto's mobile visit includes the welding truck and its engine-driven welder (you usually don't need to supply power), travel and set-up and the work itself.

7 steps to get an accurate quote and keep costs down

1. Decide if it can come to the shop

If the part can be removed safely, shop work is usually the cheaper route.

2. Take clear photos

Send a wide shot showing where it sits and how a truck could reach it, plus close-ups of the damage with a tape measure for scale.

3. Name the material

Steel, aluminum or stainless? If you're not sure, say so. It changes the process and the price.

4. Explain what the part does

A cosmetic crack and a load-bearing frame crack are repaired differently. Structural and pressure work needs the right qualifications.

5. Describe access and site rules

Parking, height limits, gate codes and hot work permit requirements all affect time on site.

6. Bundle your jobs

List every repair you have so they can be done in the same booking.

7. Book and confirm scope

Call 236-243-8484 or book online. We'll confirm scope and timing and flag anything that affects the job before we roll.

Before-you-call checklist

  • Photos: wide shot and close-ups with a tape measure
  • Material, if known (steel, aluminum, stainless)
  • What the part does and whether it carries load or pressure
  • Could it come to the shop instead? (Shop work has a 2-hour minimum.)
  • Site address, parking and access details
  • Hot work permit needed? Who signs it?
  • Any other small jobs to bundle into the visit
  • How urgent it is and your preferred dates

Need it fixed urgently?

Berto's has an emergency welding page for urgent repairs, but service isn't 24/7. Call 236-243-8484 to check availability for urgent repairs, and send photos so we can tell you what's possible.

Frequently asked questions

How much does mobile welding cost per hour in Vancouver?

It depends on the material, access, travel and time on site, so Berto's prices each job individually. Mobile work has a 4-hour minimum. Call 236-243-8484 for a quote.

Why does Berto's have a 4-hour minimum for mobile welding?

The truck still has to load, drive, set up, weld, clean up and drive back, even for a short repair. The minimum covers that and gives enough time on site to finish the job properly.

Is it cheaper to bring my part to the shop?

Usually, yes, if it can be removed and transported safely. Shop work skips travel and set-up. Berto's bills shop work hourly with a 2-hour minimum. For heavy or installed items, mobile is often cheaper overall.

Does aluminum welding cost more in Vancouver?

Generally, yes. Aluminum and stainless need TIG welding, very clean metal and more set-up time, so the same repair usually takes longer than it would on mild steel. Call 236-243-8484 for a quote.

Does Berto's offer 24/7 emergency welding?

No. Berto's has an emergency welding page, but service isn't 24/7. Call 236-243-8484 to check availability for urgent repairs, and send photos.

Get a quote

Wondering how much mobile welding will cost for your job? Call Berto's Welding Ltd. at 236-243-8484 or book online. Pricing is job-dependent, so call for a quote.

Get a Quote for Your Job

Send photos and the job details, then call or book online. Berto's will confirm scope, timing and price.

236-243-8484