Trailer Welding in Vancouver

Frame, hitch and deck repairs on site or in the shop. We come to the trailer, or you can tow it in if it's safe to move.

  • Frames, hitches & decks
  • On site or in the shop
  • 4-hour mobile minimum

Quick answer: Trailer welding in Vancouver is the repair of a cracked frame, hitch, tongue, safety-chain bracket or truck deck, done where the trailer is parked or in the shop if it can be towed in safely. Cost depends on the material, the location of the damage, access and how much prep the metal needs. Call Berto's Welding at 236-243-8484 for a quote; pricing is job-dependent.

If you need trailer welding in Vancouver, the trailer is probably earning its keep: a landscaper's utility trailer, a contractor's flatdeck, a boat trailer, or a truck deck that's started to crack. Berto's Welding Ltd. has been based in Burnaby since 2019 and offers mobile trailer welding Vancouver-wide, plus trailer welding in Burnaby and across the Lower Mainland. We're CWB certified, and work is led by a Red Seal A Class welder. For larger fleets, we can supply crews of up to 15.

What we repair

Trailer repair welding covers the metal that takes the load, plus the deck and fittings around it:

  • Trailer frame repair: cracked rails, failed factory welds, cross-members and stress fractures
  • Trailer hitch welding, tongues, couplers and pintle or ball mounts
  • Safety-chain brackets and attachments
  • Ramps, hinges and fold-up mechanisms
  • Truck deck welding, flatbeds, mounts, racks and tool box brackets
  • Aluminum trailer repair, including boat and utility trailers
  • Related equipment repairs when a machine and a trailer are down together — see equipment repair welding

We weld it where the trailer is parked

A loaded landscaping trailer, a boat on the bunks, or a frame you're not comfortable towing is a poor candidate for a shop drop-off. With mobile welding, the rig comes to your yard, job site or driveway and welds the repair where the trailer sits. The truck carries its own engine-driven welder, so you usually don't need to supply power. Mobile work has a 4-hour minimum, which covers travel and set-up. If you have more than one repair, line them up for the same visit.

If the trailer can be towed in safely, shop work is often the cleaner option. Shop jobs have a 2-hour minimum, a flat table and more control over the repair.

Can a cracked frame be welded?

Sometimes. Not always. A crack in a rail or at a cross-member is a structural problem. Many cracks can be prepared and welded, and some also need a reinforcement plate, depending on where they are and how far they have travelled. A weld is not a substitute for an inspection, and a repaired frame is not a guarantee that the trailer is safe for every load or every use. That depends on the damage, the condition of the metal, the repair, and how the trailer is used afterwards.

We'll look at the photos, and at the trailer itself, before we commit to a repair, and tell you honestly if the metal is too far gone — for example, rusted through, or cracked in a way a weld won't reliably hold. We will not promise that a repaired frame is "as good as new" or safe for any load you later put on it. After a structural repair, have the trailer inspected before you put it back to work, especially if you haul equipment, boats or commercial loads. If you're not sure whether it's safe to tow, say so — mobile welding exists for that situation.

Aluminum trailers

Aluminum boat and utility trailers are common in the Lower Mainland, and they don't repair the same way as steel. Aluminum trailer repair is usually TIG work: the joint has to be very clean, heat has to be controlled, and the filler has to match. Tell us it's aluminum when you book so we bring the right equipment. More on the process is on our aluminum TIG welding page. Thin aluminum is often easier to do well in the shop if the trailer can come in.

Hitches, tongues and safety chains

Hitch and tongue failures are easy to shrug off until the trailer is on the road. We repair ball and pintle hitches, couplers, cracked or bent tongues, and safety-chain brackets. These parts carry load, so send photos first, and plan on an inspection after a structural repair before you tow again.

What drives trailer welding cost

Trailer welding cost is job-dependent. The things that move the number are:

  • Material. Steel is the usual case. Aluminum takes more set-up and a different process.
  • Where the damage is. A crack you can stand beside is quicker than one over an axle or under a loaded deck.
  • Prep. Paint, rust, road grit and old failed welds have to come off first. Prep is often the long part of the job.
  • Access and travel. Mobile visits include driving, parking and set-up.
  • Scope. Bundle a crack, a hitch and a deck repair into one visit when we come to you.

For how mobile bookings work, including the 4-hour minimum, see how much mobile welding costs. Call 236-243-8484 for a quote.

How soon can you come out?

Our hours are Monday to Friday 7:00 a.m. to 3:30 p.m. and Saturday 8:00 a.m. to 2:00 p.m. Service isn't 24/7, and we won't promise a same-day arrival we can't keep. If the trailer is down, call 236-243-8484, send photos and the location, and we'll tell you the next time we can be there. Urgent repairs can be requested on our emergency welding page.

Mobile vs shop for trailers

FactorMobile weldingShop welding
Best forTrailers that shouldn't be towed, loaded units, job-site repairsTrailers that can be towed in safely; smaller fabrication and some aluminum work
Where the work happensWhere the trailer is parkedIn the shop, on a flat table
Booking4-hour minimum2-hour minimum
TransportNone; the rig comes to youYou tow or haul the trailer in
ConditionsWeather, access and parking matterMore control over position and finish
Your priceCall for a quoteCall for a quote

If you're unsure, send photos and say whether you're comfortable towing it.

How to get a trailer welded

  1. Park it where a truck can reach it, and unload if you can. Leave room for the welding truck to park close to the damage. Unload tools, waste or a boat if it's safe; a loaded deck is harder to work around.
  2. Take clear photos. Take a wide shot of the trailer and close-ups of the crack, hitch or deck, with a tape measure for scale.
  3. Tell us the material and what you haul. Steel or aluminum, and whether it's a utility, boat, flatdeck or equipment trailer. What you haul matters.
  4. Don't tow a frame you're not comfortable moving. If the crack looks serious, leave the trailer where it is and ask for mobile welding.
  5. Chock the wheels and clear the area. Chock the trailer, keep people and pets clear, and move anything flammable away from the weld.
  6. List every repair. Hitch, safety-chain bracket, ramp, deck and racks can often be done in the same visit.
  7. Call or book and ask about timing. Call 236-243-8484 or book online. We'll confirm scope, mobile or shop, and the next available time within our hours.

Before-you-call checklist

  • Wide photo of the trailer and close-ups of the damage, with a tape measure
  • Material, if known (steel or aluminum)
  • Type of trailer and what you usually haul
  • Can it be towed to the shop safely, or should we come to you?
  • Address, parking and access for the welding truck
  • Trailer unloaded, or a note if it has to stay loaded
  • Other repairs to bundle (hitch, chains, ramps, deck, racks)
  • How urgent it is, within Monday–Saturday hours (not 24/7)

Where we work

We're based in Burnaby and serve Vancouver, Burnaby, Surrey, Richmond, North Vancouver, West Vancouver, Coquitlam, Port Coquitlam, Port Moody, New Westminster, Delta, Langley and Maple Ridge. See all service areas.

As of November 11, 2026, Berto's holds a 5.0 rating from 18 Google reviews. If we've done work for you, you can leave a review.

Trailer Welding FAQ

How much does trailer welding cost in Vancouver?

It depends on the material, where the crack is, how much prep is needed, and whether we come to you or you bring the trailer in. Mobile work has a 4-hour minimum; shop work has a 2-hour minimum. Call 236-243-8484 for a quote.

Can you weld a cracked trailer frame?

Often, yes, but it depends on the crack's location, length and the metal's condition. A weld is not a substitute for an inspection, and we can't guarantee a repaired frame for every load. We'll say honestly if a repair is appropriate.

Do you repair aluminum trailers?

Yes. Aluminum trailer repair is done with TIG welding and needs a very clean joint, so prep takes longer than steel. Tell us it's aluminum when you book so we bring the right equipment and consumables. Call 236-243-8484 for a quote.

Can you weld a hitch, tongue or safety chain?

Yes. Trailer hitch welding, tongue repairs and safety-chain brackets are common jobs, done on site or in the shop. Because these parts carry load, send photos first and we'll tell you what the repair involves. After a structural repair, have the trailer inspected before you tow.

How quickly can you come out to weld my trailer?

We work Monday to Friday 7:00 a.m. to 3:30 p.m. and Saturday 8:00 a.m. to 2:00 p.m. Service isn't 24/7. Call 236-243-8484, send photos, and we'll tell you the next available time. Urgent jobs can be requested through our emergency welding page.

Need a Trailer Frame, Hitch or Deck Repaired?

Send photos and tell Berto's where the trailer is. Pricing is job-dependent, so call for a quote.

236-243-8484